This high-quality Brass Stock Sheet, specifically engineered for lubricating applications, offers exceptional wear resistance and low friction properties. Its substantial thickness ensures durability for heavy-duty industrial use.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.679" |
| Length | 33" |
| Width | 36" |
Designed for demanding industrial environments, this Brass Stock Sheet boasts a precise thickness of 0.679 inches, a length of 33 inches, and a width of 36 inches. Its inherent self-lubricating characteristics, attributed to the material's composition and microstructure, make it an optimal choice for components requiring reduced friction and wear. This brass alloy provides excellent machinability for custom fabrication and exhibits good corrosion resistance, ensuring longevity in harsh operational conditions. Ideal for bearings, bushings, and sliding mechanisms where lubrication is critical for performance and lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of contaminants. 2. Precisely machine the brass stock sheet to the required dimensions and tolerances. 3. Securely install the machined component into its intended application, ensuring proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation of mating parts | Thoroughly clean and degrease all mating surfaces before installation to prevent premature wear. |
| Over-tightening fasteners, causing deformation | Adhere to specified torque values during installation to avoid stressing the brass component and compromising its lubricating properties. |
A: This Brass Stock Sheet is manufactured from Brass.
A: High-load journal bearings, Wear plates and guides, Self-lubricating bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||