This premium brass stock sheet is engineered for demanding lubricating applications. Its superior material properties ensure exceptional performance and longevity in high-friction environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.542" |
| Length | 47" |
| Width | 43" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.542 inches, a generous length of 47 inches, and a width of 43 inches. Fabricated from high-grade brass, it exhibits inherent self-lubricating properties, low coefficient of friction, and excellent wear resistance, making it ideal for bushings, bearings, and sliding components in machinery. Its machinability allows for custom component fabrication tailored to specific operational needs, ensuring optimal performance and reduced maintenance cycles in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended application area is clean and free of debris. 2. Carefully cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component in its designated position, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or damage. | Utilize sharp, high-quality metal cutting tools specifically designed for brass to ensure clean cuts and preserve material integrity. |
| Inadequate surface preparation before installation. | Thoroughly clean the mating surfaces and the installed brass component to ensure optimal frictional properties and prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates in sliding mechanisms, Self-lubricating bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||