This robust brass stock sheet is engineered for demanding lubricating applications. Its superior material properties and precise dimensions ensure optimal performance in reducing friction and wear.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.472" |
| Length | 30" |
| Width | 17" |
A proven choice for industrial professionals, this brass stock sheet offers exceptional wear resistance and a low coefficient of friction, making it ideal for self-lubricating components and bearing surfaces. Manufactured from high-grade brass, it exhibits excellent machinability and corrosion resistance, ensuring longevity in harsh environments. The precise dimensions of 0.472 inches thickness, 30 inches length, and 17 inches width provide ample material for custom fabrication of bushings, wear pads, and other critical friction-reducing elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions for the specific application. 3. Securely fasten the brass component to the mating surface, ensuring proper contact and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly cut material. | Always measure and verify dimensions before cutting to ensure a precise fit for optimal contact and friction reduction. |
| Failing to account for thermal expansion. | While brass has relatively low thermal expansion, consider the operating temperature range and allow for slight clearances if necessary to prevent binding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings and bushings, Wear plates and guide rails, Anti-friction sliding surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||