This premium brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and inherent material properties ensure consistent performance and extended service life in critical industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.403" |
| Length | 39" |
| Width | 38" |
Specified by design engineers worldwide, this brass stock sheet offers superior antifriction and wear-resistant properties, crucial for lubrication systems. With a precise thickness of 0.403 inches, a length of 39 inches, and a width of 38 inches, it is fabricated from high-grade brass, ensuring excellent machinability and corrosion resistance. This material is ideal for components requiring low friction against mating surfaces, such as bearing cages, wear plates, and specialized sliding mechanisms in high-pressure or high-temperature environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Accurately machine the brass stock sheet to the required dimensions as per engineering drawings. 3. Install the component, ensuring proper fit and alignment within the lubricating system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and dimensional inaccuracies. | Employ sharp, high-speed steel or carbide cutting tools specifically designed for brass machining. Maintain appropriate feed rates and speeds to minimize heat buildup and prevent tool chatter. |
| Inadequate surface preparation of the mating component, resulting in premature wear. | Thoroughly clean and, if necessary, lap the mating surface to a smooth finish. Ensure compatibility with the lubricating medium being used. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing cages and retainers, Wear plates and guides, Self-lubricating components, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||