This high-performance brass stock sheet is engineered for superior lubrication in demanding industrial settings. Its inherent properties minimize friction and wear, ensuring extended component life and operational efficiency.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.316" |
| Length | 46" |
| Width | 18" |
A high-performance industrial component, this brass stock sheet offers exceptional low-friction characteristics crucial for lubricating applications. Manufactured from high-grade brass, it exhibits excellent machinability and inherent self-lubricating properties. The precise dimensions of 0.316" thickness, 46" length, and 18" width ensure compatibility with a wide range of custom fabrication and component manufacturing. Its inherent resistance to corrosion and galling makes it ideal for sliding mechanisms, bushings, and wear plates where reliable lubrication is paramount and contamination must be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated brass component to its intended mounting location, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation before installation. | Always degrease and clean all mating surfaces to prevent premature wear and ensure optimal performance. |
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, high-quality cutting tools designed for brass to achieve clean cuts and maintain dimensional integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings and bearings, Wear plates and guides in sliding mechanisms, Custom fabricated components requiring low friction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||