This premium brass stock sheet is engineered for superior performance in lubricating applications. Its intrinsic properties minimize friction and wear, ensuring extended component life and operational efficiency in demanding industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.051" |
| Length | 22" |
| Width | 27" |
A proven choice for industrial professionals, this brass stock sheet offers exceptional performance due to its inherent self-lubricating characteristics. Measuring 0.051 inches in thickness, 22 inches in length, and 27 inches in width, this material exhibits excellent machinability and wear resistance. Its low coefficient of friction makes it ideal for applications requiring minimal lubrication, such as bushings, bearings, and sliding components where reduced maintenance and prolonged operational life are critical. The brass alloy composition ensures good thermal conductivity and corrosion resistance, further enhancing its suitability for diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated brass component to the designated assembly point, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or material deformation. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and preserve material integrity. |
| Insufficient surface preparation of mating components, causing premature wear. | Thoroughly clean and degrease all mating surfaces to remove any debris, oils, or residues that could impede the self-lubricating action. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates in sliding mechanisms, Bearings for low-speed applications, Components in food processing equipment, Electrical contact springs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||