This premium brass stock sheet is engineered for superior performance in lubricating applications. Its inherent properties make it an ideal material for components requiring reduced friction and enhanced wear resistance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.397" |
| Length | 39" |
| Width | 46" |
A high-performance industrial component, this brass stock sheet is manufactured to precise specifications, featuring a thickness of 0.397 inches, a length of 39 inches, and a width of 46 inches. Composed of high-grade brass, it exhibits excellent self-lubricating qualities, a low coefficient of friction, and superior corrosion resistance. These attributes make it exceptionally suitable for applications where continuous movement and minimal lubrication are critical, such as bushings, bearings, and sliding mechanisms. The material's malleability also allows for intricate custom machining, ensuring a perfect fit and optimal function in diverse operational contexts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut or machine the brass stock sheet to the required dimensions for the component. 3. Install the machined component, ensuring proper alignment and fit within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inappropriate cutting tools that can cause deformation or excessive heat. | Employ sharp, specialized cutting tools designed for brass to ensure clean cuts and minimize thermal stress. |
| Over-tightening fasteners, which can lead to premature wear or galling. | Follow recommended torque specifications and consider using thread lubricants if necessary to prevent binding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal Bearings, Bushings for Sliding Mechanisms, Wear Plates in Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||