This premium brass stock sheet, precisely engineered at 0.491 inches thick, offers exceptional durability and corrosion resistance. Ideal for custom filtration media and industrial components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.491" |
| Length | 46" |
| Width | 26" |
Specified by design engineers worldwide, this brass stock sheet meets stringent material requirements for critical filtering applications. Composed of a high-copper alloy (typically UNS C26000 or equivalent), it exhibits excellent machinability and inherent antimicrobial properties. The substantial 0.491" (12.47mm) thickness provides superior structural integrity for demanding environments. Dimensions are precisely controlled at 46 inches (1168mm) in length and 26 inches (660mm) in width, ensuring consistent performance in fabrication and assembly processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut the brass sheet to the required filter element dimensions using appropriate tooling. 3. Integrate the cut brass filter media into the designated housing or assembly, ensuring a secure and leak-free fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge brass where structural integrity is critical. | Always confirm the required thickness specification (0.491") to prevent premature failure or deformation. |
| Inadequate cleaning of the brass surface before integration into a filtration system. | Thoroughly degrease and clean the brass surface to prevent contaminants from entering the filtered medium. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom filtration media fabrication, Industrial strainers and sieves, Specialty chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||