A precisely manufactured Brass Stock Sheet, ideal for electrical and lighting applications. Offering excellent conductivity, corrosion resistance, and workability, this sheet meets stringent industrial requirements.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.373" |
| Length | 43" |
| Width | 22" |
Specified by design engineers worldwide, this Brass Stock Sheet is engineered to exacting tolerances for critical electrical and lighting applications. With a substantial thickness of 0.373 inches, a generous length of 43 inches, and a width of 22 inches, it provides ample material for complex fabrications. The inherent properties of brass, including its excellent electrical conductivity, high tensile strength, and resistance to corrosion, make it the material of choice for components requiring reliable performance and longevity in demanding environments. Its machinability further enhances its suitability for intricate designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to cutting. 2. Precisely cut the brass sheet to the required design specifications using appropriate cutting tools. 3. Securely fasten the fabricated component to the intended electrical or lighting fixture.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrectly specified brass sheet for critical components. | Always cross-reference project specifications with the ordered material dimensions and grade to ensure precise fit and performance. |
| Inadequate surface preparation before soldering or welding. | Thoroughly clean the brass surface to remove any oxidation, grease, or contaminants to ensure strong, reliable joints. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Busbars, Connector Components, Lighting Fixture Housings, Switchgear Components, High-Conductivity Terminals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||