This premium brass stock sheet is specifically designed for lubricating applications. Its robust construction and inherent material properties ensure long-lasting performance in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.329" |
| Length | 36" |
| Width | 13" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.329 inches, a generous length of 36 inches, and a width of 13 inches. The brass alloy offers excellent inherent lubricity and good wear resistance, making it ideal for sliding components, bearings, and bushings where friction reduction is critical. Its machinability allows for precise customization to meet specific component requirements. This material exhibits good corrosion resistance, further enhancing its durability in various operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions. 3. Securely fasten the fabricated component to the intended assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient lubrication during machining | Employ a high-quality cutting fluid to maintain tool life and surface finish. |
| Over-tightening fasteners, leading to deformation | Adhere to specified torque values to prevent stress concentrations and preserve material integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings, Bushings and sleeves, Wear plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||