This high-quality brass stock sheet is specifically formulated for lubricating applications, offering excellent wear resistance and a low coefficient of friction. Its robust dimensions make it suitable for a wide range of industrial uses.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.662" |
| Length | 33" |
| Width | 30" |
Engineered for reliability and performance, this brass stock sheet boasts a nominal thickness of 0.662 inches, a substantial length of 33 inches, and a generous width of 30 inches. The material's inherent self-lubricating properties, derived from its specific alloy composition, make it exceptionally well-suited for components subjected to high loads and continuous motion where reduced friction and wear are paramount. Its machinability allows for precise fabrication into custom parts. Typical applications include bearings, bushings, wear plates, and sliding mechanisms in heavy machinery and automated systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut and shape the brass sheet to required dimensions using appropriate tooling. 3. Securely fasten the fabricated brass component to the intended assembly, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating grade. | Always specify and procure brass stock designated for lubricating applications to achieve the intended low friction and wear characteristics. |
| Inadequate surface preparation of mating components. | Thoroughly clean and degrease both the brass component and its mating surface before installation to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates for sliding mechanisms, Bushings in high-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||