This premium brass stock sheet provides a stable, non-magnetic, and corrosion-resistant substrate essential for accurate measuring and inspection applications within demanding industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.220" |
| Length | 42" |
| Width | 41" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional dimensional stability and a low coefficient of thermal expansion, crucial for maintaining calibration in precision measuring devices and inspection fixtures. Its inherent non-magnetic properties prevent interference with sensitive equipment. The material's excellent machinability allows for custom fabrication of templates, gauges, and reference surfaces. Manufactured to precise tolerances, the sheet's thickness of 0.220", length of 42", and width of 41" ensure consistency and reliability for critical metrology applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Carefully position the brass stock sheet to align with intended fixture or assembly points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the mounting surface. | Thoroughly clean the mounting surface with a degreaser and lint-free cloth before installation to ensure optimal adhesion and flatness. |
| Over-tightening fasteners, leading to sheet distortion. | Hand-tighten fasteners initially, then use a torque wrench set to the manufacturer's recommended specification to prevent deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision gauging and template fabrication, Reference standards for metrology equipment, Custom inspection fixture bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||