This high-performance lubricating brass stock sheet offers exceptional wear resistance and low friction. Its precise dimensions and material composition make it a superior choice for demanding industrial applications where smooth operation is critical.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.221" |
| Length | 47" |
| Width | 18" |
A high-performance industrial component, this brass stock sheet is engineered with a thickness of 0.221 inches, a length of 47 inches, and a width of 18 inches. Crafted from a specialized brass alloy known for its inherent self-lubricating properties, it exhibits excellent machinability and corrosion resistance. This material is specifically formulated for applications requiring reduced wear and friction, such as bushings, bearings, sliding components, and wear plates within heavy machinery and precision equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always select a lubricating grade brass for components experiencing significant sliding or rotational wear. |
| Improper surface preparation before installation. | Thoroughly clean and deburr mating surfaces to prevent premature wear and ensure optimal contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearings and Bushings, Wear Strips and Plates, Low-Friction Sliding Mechanisms, Gears and Sprockets (low load), Sealing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||