This premium brass stock sheet is engineered for superior performance in abrading and polishing applications. Its precise dimensions and material integrity ensure consistent results and long-term durability for industrial use.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.241" |
| Length | 12" |
| Width | 43" |
Precision-manufactured to tight tolerances, this brass stock sheet offers exceptional flatness and dimensional accuracy. Composed of a high-grade brass alloy (specific alloy composition available upon request), it exhibits excellent machinability and corrosion resistance, making it ideal for use as a substrate or component in abrasive media development, precision polishing surfaces, and decorative applications where a bright, durable finish is paramount. The 0.241-inch thickness provides substantial rigidity for demanding tasks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the work surface thoroughly to remove any debris or contaminants. 2. Position the brass stock sheet accurately for the intended application. 3. Secure the sheet using appropriate fastening methods (e.g., mechanical fasteners, adhesives) as dictated by the project requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong abrasive grit for brass. | Consult abrasive manufacturer's recommendations for brass to avoid scratching or excessive material removal. |
| Inadequate surface preparation before polishing. | Ensure the brass surface is free of oils, dirt, and previous abrasive residues for optimal polishing results. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Abrasive media backing, Precision polishing surfaces, Decorative metalwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||