This substantial brass stock sheet offers exceptional dimensional stability for critical measuring and inspecting tasks. Its robust brass composition ensures longevity and resistance to environmental factors in demanding industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.441" |
| Length | 37" |
| Width | 43" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.441 inches thick, 37 inches in length, and 43 inches in width. Fabricated from a high-grade brass alloy, it exhibits excellent machinability, good electrical conductivity, and superior corrosion resistance, making it suitable for precision tooling, calibration standards, and durable component fabrication in environments where accuracy and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the workspace is clean and free of debris. 2. Carefully position the brass stock sheet to its intended location or application. 3. Secure the sheet using appropriate fastening methods (e.g., clamps, adhesives, or mechanical fasteners) as dictated by the specific use case.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, potentially deforming the sheet. | Use hand-tightening or torque-controlled methods to secure fasteners, avoiding excessive pressure on the brass. |
| Using abrasive cleaning agents that can scratch the brass surface. | Employ non-abrasive cleaners and soft cloths for maintenance to preserve the integrity of the surface finish. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision gauging and calibration fixtures, Durable template and die construction, Electrical grounding and bonding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||