This industrial-grade brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and inherent material properties make it a reliable choice for demanding operational needs.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.603" |
| Length | 15" |
| Width | 34" |
A proven choice for industrial professionals, this lubricating brass stock sheet measures 0.603 inches in thickness, 15 inches in length, and 34 inches in width. Crafted from a specialized brass alloy, it exhibits excellent self-lubricating properties, low friction coefficients, and good wear resistance, making it ideal for components subjected to continuous motion and high loads. This material is chosen for its ability to reduce wear and maintenance requirements in critical machinery and equipment where traditional lubrication may be difficult or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the receiving surface is clean and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the fabricated component to its intended application using recommended fasteners and procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Select lubricating grade brass for its specialized self-lubricating and wear-resistant properties. |
| Insufficient material preparation before cutting. | Thoroughly clean and deburr the brass sheet edges after cutting to prevent premature wear or damage to mating components. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Wear Plates and Strips, Slide Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||