This premium brass stock sheet is engineered for superior performance in lubricating applications. Its robust composition offers excellent wear resistance and controlled friction, ensuring extended component life in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.513" |
| Length | 15" |
| Width | 28" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.513 inches, a length of 15 inches, and a width of 28 inches. Composed of a high-quality brass alloy, it exhibits inherent self-lubricating properties, excellent machinability for intricate designs, and superior corrosion resistance. These characteristics make it ideal for sliding components, bearings, and wear surfaces where reduced friction and operational reliability are paramount. Its dimensional stability ensures consistent performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated brass component to the intended assembly using specified fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during machining, which can lead to work hardening and deformation. | Employ appropriate cutting speeds, feed rates, and lubrication when machining brass to prevent overheating and maintain dimensional accuracy. |
| Inadequate surface preparation of mating components, leading to premature wear. | Thoroughly clean and degrease both the brass component and its mating surface before installation to ensure optimal lubrication and contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||