This lubricating grade brass stock sheet provides superior friction reduction and wear resistance. Its dense microstructure and inherent self-lubricating properties make it an ideal choice for demanding mechanical components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.788" |
| Length | 18" |
| Width | 37" |
Trusted by engineers across multiple sectors, this lubricating brass stock sheet is manufactured to precise tolerances, featuring a thickness of 0.788 inches, a width of 37 inches, and a length of 18 inches. Its composition is optimized for low friction and excellent wear characteristics, making it suitable for applications where reduced stick-slip and extended component life are critical. The material exhibits good machinability, allowing for intricate part fabrication, and possesses inherent corrosion resistance, ensuring durability in diverse operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from any contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the intended component or surface, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where lubricating properties are essential. | Select lubricating grade brass stock sheet specifically designed for reduced friction and wear. |
| Inadequate surface preparation before installation. | Thoroughly clean and de-grease the installation surface to ensure optimal adhesion and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Bushings, Slide guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||