This premium brass stock sheet is specifically engineered for superior lubrication in demanding industrial environments. Its robust dimensions and material properties ensure exceptional performance and longevity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.747" |
| Length | 16" |
| Width | 45" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a substantial 0.747" thickness, ensuring exceptional structural integrity and wear resistance. The material composition of brass provides inherent self-lubricating properties, significantly reducing friction and wear in dynamic mechanical systems. Its precise dimensions of 16" width and 45" length offer ample material for custom fabrication of critical components such as wear plates, bushings, and specialized bearing surfaces in high-load, low-speed machinery and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Precisely cut the brass stock to the required dimensions using appropriate machining tools. 3. Securely fasten the fabricated brass component to the designated application area using recommended fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for the application's load requirements. | Always consult load charts and engineering specifications to select the appropriate brass stock thickness that exceeds anticipated operational stresses. |
| Improper surface preparation of mating components. | Thoroughly clean and deburr both the brass component and its mating surface to ensure optimal contact and friction reduction. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty wear plates, Custom bushings and bearings, Sliding mechanism components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||