This premium brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and material composition ensure reliable operation and extended component life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.361" |
| Length | 21" |
| Width | 32" |
Manufactured under strict quality controls, this brass stock sheet offers exceptional machinability and inherent self-lubricating properties, making it ideal for bearing surfaces, wear plates, and bushings. The material's composition is optimized for low friction and resistance to galling, even under moderate load conditions. With a thickness of 0.361 inches, a length of 21 inches, and a width of 32 inches, this sheet provides ample material for custom fabrication in demanding industrial environments. Its thermal conductivity also aids in heat dissipation from friction points.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove debris and contaminants. 2. Precisely cut or machine the brass sheet to the required dimensions for its intended application. 3. Securely install the brass component, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-lubricating grade brass for friction-critical applications. | Always select a brass alloy specifically designated for lubricating properties when low friction is paramount. |
| Inadequate surface preparation before installation. | Ensure all surfaces are meticulously cleaned and free of any particles that could impede smooth operation or cause premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guide strips, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||