This high-quality brass stock sheet is specifically engineered for lubricating applications. Its robust construction and inherent material properties ensure superior wear resistance and smooth operational performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 21" |
| Width | 39" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.576 inches, a length of 21 inches, and a width of 39 inches. Composed of a high-grade brass alloy, it exhibits excellent machinability, good corrosion resistance, and a naturally low coefficient of friction, making it ideal for components requiring self-lubricating properties or reduced wear in sliding contact. Its consistent dimensions and material integrity guarantee predictable behavior in manufacturing and operational settings, meeting stringent industrial standards for demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free from contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut brass component using approved industrial adhesives or mechanical fasteners, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-load, high-wear applications. | Specify a brass alloy with enhanced wear resistance and a lower coefficient of friction, such as those designed for bearing or bushing applications. |
| Inadequate surface preparation before machining or bonding. | Thoroughly degrease and clean all surfaces to ensure optimal adhesion and machining accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings and bushings, Wear plates and sliding surfaces, Gears and sprockets in low-friction systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||