This substantial brass stock sheet offers exceptional strength and durability for critical suspending and bracing applications. Its inherent corrosion resistance ensures long-term performance in diverse environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.510" |
| Length | 26" |
| Width | 40" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a significant 0.510" thickness, providing robust structural integrity for heavy-duty applications. Composed of a high-grade brass alloy, it exhibits excellent tensile strength, superior corrosion resistance, and good machinability, making it suitable for custom fabrication. The generous dimensions of 26" x 40" allow for versatile use in load-bearing configurations and custom bracing systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Accurately mark and drill pilot holes according to load requirements and fastener specifications. 3. Securely fasten the brass sheet using appropriately rated hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to deformation of the brass sheet. | Use a torque wrench to tighten fasteners to the manufacturer's recommended specification for the chosen hardware and load. |
| Using incompatible fasteners (e.g., steel without isolation) leading to galvanic corrosion. | Employ stainless steel or brass fasteners, and consider isolating dissimilar metals with appropriate washers or coatings if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural bracing in industrial settings, Custom mounting platforms for equipment suspension, Corrosion-resistant supports in marine or chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||