This premium brass stock sheet, engineered for lubricating applications, offers exceptional self-lubricating properties and superior machinability. Its precise dimensions ensure consistent performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.776" |
| Length | 20" |
| Width | 22" |
Specified by design engineers worldwide, this brass stock sheet (0.776" thickness, 20" length, 22" width) is manufactured from a high-quality, leaded brass alloy renowned for its inherent lubricity and excellent bearing characteristics. This material exhibits a low coefficient of friction, minimizing wear and heat generation in sliding contact applications. Its machinability is outstanding, allowing for intricate component fabrication and tight tolerances critical for efficient lubrication systems. Ideal for bushings, bearings, and wear plates where reduced friction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Accurately cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the brass component using recommended fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to uneven contact. | Thoroughly clean and flatten the mounting surface before installation. |
| Using incorrect cutting tools, resulting in burrs and dimensional inaccuracies. | Employ sharp, suitable cutting tools designed for brass to achieve clean edges and precise dimensions. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||