Precision-crafted brass stock sheet for critical measuring and inspecting tasks. Offers excellent machinability, dimensional stability, and corrosion resistance, ensuring reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.520" |
| Length | 18" |
| Width | 25" |
Specified by design engineers worldwide, this premium brass stock sheet offers exceptional dimensional accuracy and material integrity. With a thickness of 0.520 inches, a length of 18 inches, and a width of 25 inches, it provides a substantial surface area for custom fabrication and intricate component creation. The inherent properties of brass, including its excellent conductivity, moderate hardness, and resistance to tarnishing, make it an ideal substrate for precision tooling, calibration standards, and critical inspection fixtures where repeatable measurements are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and level. 2. Position the brass stock sheet according to the project's requirements. 3. Secure the sheet using appropriate clamping or fastening methods as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that may lead to burrs or deformation. | Employ high-speed steel or carbide-tipped cutting tools designed for brass, and maintain consistent feed rates to minimize edge imperfections. |
| Inadequate surface preparation for subsequent processes like etching or plating. | Thoroughly degrease and lightly abrade the surface with fine-grit sandpaper (e.g., 320-400 grit) to ensure optimal adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision measuring gauge fabrication, Calibration standards and fixtures, Custom inspection tooling, Component prototyping for instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||