This robust brass stock sheet provides a stable and accurate surface for critical measuring and inspecting tasks. Its substantial thickness and large dimensions ensure reliability in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.644" |
| Length | 35" |
| Width | 41" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.644 inches in thickness, 35 inches in length, and 41 inches in width. Constructed from high-quality brass, it exhibits excellent machinability, good electrical conductivity, and superior corrosion resistance, making it ideal for fabricating precision jigs, fixtures, reference standards, and specialized inspection tooling where dimensional stability and non-sparking properties are paramount. The alloy composition ensures consistent material properties across the sheet.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free from debris. 2. Carefully position the brass stock sheet onto the prepared surface, aligning it as required. 3. Secure the sheet using appropriate fasteners (e.g., countersunk screws) at regular intervals, ensuring even pressure distribution to maintain flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that cause warping. | Employ appropriately sized and spaced fasteners, preferably with washers, to distribute load evenly and prevent distortion. |
| Mounting on an uneven surface leading to inaccuracies. | Verify the mounting surface is perfectly flat and level before installation. Use shims if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Fabrication of precision inspection gauges, Construction of custom jigs and fixtures, Base material for calibration standards, Electrical grounding and busbar components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||