This premium brass stock sheet is specifically engineered for lubricating applications. Its precise dimensions and inherent material properties ensure optimal performance in demanding environments requiring low friction and excellent wear characteristics.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.982" |
| Length | 26" |
| Width | 45" |
Built to exacting engineering tolerances, this brass stock sheet boasts a thickness of 0.982 inches, a width of 26 inches, and a length of 45 inches. Composed of a specialized brass alloy, it offers a low coefficient of friction and exceptional self-lubricating properties, minimizing wear and heat generation in moving parts. This makes it ideal for applications demanding sustained operational efficiency and extended component lifespan. Its machinability allows for precise custom fabrication for specialized bearing surfaces and sliding components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of contaminants. 2. Carefully position the brass sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring uniform pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean and de-grease both the brass sheet and mating surfaces before installation. |
| Over-tightening fasteners, causing distortion or stress concentrations. | Apply fasteners evenly and incrementally to avoid localized stress and maintain flatness. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates in sliding mechanisms, Bushings for low-friction pivots.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||