This premium brass stock sheet is specifically formulated for lubricating applications. Its controlled microstructure ensures excellent anti-friction properties, making it ideal for demanding environments where reduced wear and smooth operation are critical.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 20" |
| Width | 40" |
Engineered for reliability and performance, this brass stock sheet boasts a nominal thickness of 0.639 inches, a width of 20 inches, and a length of 40 inches. Composed of a brass alloy with inherent self-lubricating characteristics, it exhibits superior machinability and excellent thermal conductivity. Its composition is optimized to minimize friction and prevent galling when in contact with other metals, ensuring extended component life and operational efficiency in high-load, high-speed applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from any contaminants. 2. Carefully align the brass stock sheet with the intended application area, ensuring proper fit and minimal stress. 3. Secure the sheet using appropriate fastening methods, such as riveting, bonding, or mechanical fastening, depending on the specific end-use requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for lubricating applications. | Select brass specifically designated or formulated for lubricating properties to ensure optimal performance and longevity. |
| Improper surface preparation before installation. | Thoroughly clean and degrease both the brass sheet and the mating surface to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear strips and guide components, Bearing surfaces in low-load applications, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||