This robust brass stock sheet, specifically formulated for lubricating applications, offers exceptional wear resistance and self-lubricating properties. Its precise dimensions ensure seamless integration into critical machinery.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.301" |
| Length | 39" |
| Width | 35" |
Specified by design engineers worldwide, this brass stock sheet (0.301" thickness, 39" length, 35" width) is manufactured to stringent tolerances. Its intrinsic machinability and low friction coefficient make it ideal for components requiring minimal lubrication and high performance under load. The alloy composition is optimized for excellent thermal conductivity and corrosion resistance, ensuring extended service life in demanding environments. It is particularly suited for plain bearings, bushings, and sliding components where galling and wear must be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the brass component to its intended mounting location, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to material deformation. | Employ sharp, high-quality cutting tools and apply steady, controlled pressure for clean cuts. |
| Inadequate surface preparation before installation, causing premature wear. | Ensure all mating surfaces are meticulously cleaned and free of any abrasive particles. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Plain Bearings, Bushings, Wear Strips.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||