This premium brass stock sheet offers exceptional strength and corrosion resistance. Its substantial 0.869-inch thickness makes it ideal for robust suspending and bracing applications in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.869" |
| Length | 17" |
| Width | 39" |
Trusted by engineers across multiple sectors, this brass stock sheet provides superior structural integrity and longevity. With a precise thickness of 0.869 inches, a length of 17 inches, and a width of 39 inches, it offers a substantial surface area for demanding load-bearing applications. Brass alloys offer excellent corrosion resistance, making this sheet suitable for environments exposed to moisture or chemicals, ensuring reliable performance in critical structural support systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely mark and drill pilot holes according to structural load calculations and fastener specifications. 3. Securely fasten the brass sheet using appropriately rated industrial fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate load calculation leading to material failure. | Always perform thorough structural load calculations based on the intended application and consult engineering best practices before installation. |
| Using incorrect or undersized fasteners. | Select fasteners with appropriate tensile strength, shear strength, and corrosion resistance that are specifically rated for the expected loads and environmental conditions. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural bracing, Industrial support beams and frames, Custom fabrication for high-stress components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||