This robust brass stock sheet offers superior corrosion resistance and excellent machinability, making it a prime choice for critical industrial fabrication and component manufacturing.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.876" |
| Length | 22" |
| Width | 34" |
Designed for demanding industrial environments, this brass stock sheet boasts a precise thickness of 0.876 inches, a substantial length of 22 inches, and a width of 34 inches. Fabricated from high-grade brass alloy, it exhibits excellent electrical conductivity, thermal properties, and resistance to corrosion, ensuring longevity and performance in rigorous applications. Its substantial dimensions and material composition make it suitable for custom component fabrication, prototyping, and applications requiring a durable, non-sparking material.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the cutting surface and ensure proper safety guards are in place. 2. Accurately measure and mark the desired dimensions on the brass sheet. 3. Utilize appropriate cutting tools (e.g., industrial shears, abrasive saws) for precise material removal. 4. Deburr all cut edges to ensure a smooth finish and prevent hazards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for brass, leading to material deformation or tool damage. | Employ cutting tools specifically designed for brass, ensuring they are sharp and properly maintained for clean cuts. |
| Failure to deburr cut edges, creating sharp points that can cause injury or damage to other components. | Always thoroughly deburr all cut edges immediately after cutting to achieve a safe and smooth finish. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom component fabrication, Electrical connector manufacturing, Corrosion-resistant housing, Prototyping and R&D, Decorative industrial elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||