This high-grade brass stock sheet is engineered for superior lubrication and wear resistance. Its precise dimensions and material composition make it the optimal choice for demanding industrial applications requiring reduced friction and extended component life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.524" |
| Length | 46" |
| Width | 31" |
Precision-manufactured to tight tolerances, this brass stock sheet offers exceptional dimensional stability. The material's inherent self-lubricating properties, attributed to its specific alloy composition (typically a leaded brass for machinability and lubrication), minimize friction and wear in dynamic applications. With a thickness of 0.524 inches, a length of 46 inches, and a width of 31 inches, this sheet is suitable for fabricating robust, low-friction components such as bearings, bushings, and sliding mechanisms where consistent performance under load is paramount. Its excellent corrosion resistance further enhances its durability in various operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the brass sheet will be applied is clean, dry, and free of debris. 2. Carefully cut the brass stock sheet to the required dimensions using appropriate cutting tools for brass. 3. Secure the fabricated brass component to its intended mating surface using suitable fasteners or adhesives, ensuring proper alignment for intended function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to deformation or burrs on the brass. | Employ sharp, carbide-tipped saws or abrasive cutoff wheels specifically designed for cutting brass to ensure clean, precise edges. |
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly degrease and clean both the brass surface and the mating surface before assembly to ensure optimal contact and function. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Manufacturing of bearings and bushings, Fabrication of wear plates and sliding components, Production of low-friction guide rails and tracks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||