Engineered for superior performance in lubricating applications, this brass stock sheet offers excellent wear resistance and a low coefficient of friction. Its robust composition ensures reliability in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.604" |
| Length | 22" |
| Width | 26" |
A proven choice for industrial professionals, this brass stock sheet boasts a thickness of 0.604 inches, a length of 22 inches, and a width of 26 inches. Composed of brass, it exhibits inherent self-lubricating properties and excellent machinability, making it ideal for components requiring reduced friction and wear. Its non-sparking nature and corrosion resistance further enhance its utility in diverse industrial environments, particularly in machinery operating under moderate loads and speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the brass stock sheet to the required dimensions. 3. Securely fasten the sheet using appropriate industrial-grade adhesives or mechanical fasteners, ensuring a flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the mounting surface leading to poor adhesion or premature wear. | Thoroughly degrease and clean the mounting surface before installation to ensure optimal surface contact and longevity. |
| Over-tightening mechanical fasteners, which can distort the sheet and compromise its lubricating properties. | Use appropriate torque settings for all fasteners to prevent deformation and maintain the integrity of the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear strips and guides in machinery, Bushings and bearings for low-load applications, Anti-friction surfaces on sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||