This premium brass stock sheet is specifically formulated for lubricating applications. Its controlled composition ensures excellent wear resistance and low coefficient of friction, making it ideal for demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.018" |
| Length | 29" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.018" thick brass stock sheet offers precise dimensions of 29" in length and 17" in width. Composed of a carefully selected alloy, it exhibits superior machinability and excellent inherent lubricity, crucial for minimizing wear and operational friction in dynamic systems. Its dense grain structure and corrosion resistance further enhance its suitability for continuous contact applications, ensuring longevity and reliable performance under moderate load and speed conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet to the intended component, ensuring even contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of lubricating grade for friction-sensitive applications. | Always select lubricating grade brass for components where friction and wear are critical factors. |
| Inadequate surface preparation of mating parts. | Thoroughly clean and deburr both the brass sheet and the mating surface before assembly to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings, Wear plates, Low-friction guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||