This premium brass stock sheet is engineered for superior performance in lubrication systems. Its specific alloy composition and precise dimensions ensure reliable operation and extended service life in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.221" |
| Length | 23" |
| Width | 31" |
Designed for demanding industrial environments, this brass stock sheet features a nominal thickness of 0.221 inches, a length of 23 inches, and a width of 31 inches. Fabricated from a specialized brass alloy known for its excellent self-lubricating properties, it exhibits superior wear resistance and a low coefficient of friction, crucial for reducing mechanical wear and heat generation in sliding or rotating components. Its inherent corrosion resistance further enhances durability in harsh operational conditions, making it ideal for bushings, bearings, and guide rails where consistent lubrication and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the cut brass component to its intended mounting location, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, high-quality metal cutting blades designed for brass to achieve clean cuts without damaging the material. |
| Insufficient surface preparation before installation, causing premature wear. | Thoroughly clean both the brass sheet and mating surfaces to remove any contaminants that could impede lubrication or cause abrasion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom bushings and bearings, Wear plates and guide surfaces, Lubricating inserts for machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||