This high-quality brass stock sheet is engineered for superior lubrication and wear resistance. Its precise dimensions and inherent material properties make it a critical component in demanding industrial applications requiring low friction and extended service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.317" |
| Length | 26" |
| Width | 41" |
Designed for demanding industrial environments, this brass stock sheet boasts a thickness of 0.317 inches, a length of 26 inches, and a width of 41 inches. Composed of a specialized brass alloy, it exhibits excellent machinability, corrosion resistance, and critically, superior self-lubricating properties. This makes it ideal for components subjected to sliding friction, such as bearings, bushings, wear plates, and specialized machine parts where reducing wear and maintaining operational efficiency are paramount. The material's ductility further enhances its suitability for forming and fitting into complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut and shape the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the component to the intended substrate, verifying proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear, low-friction applications. | Specify lubricating-grade brass stock for components requiring self-lubricating properties to prevent premature wear and seize-up. |
| Improper surface preparation of mating parts. | Thoroughly clean and de-grease both the brass component and its mating surface before installation to ensure optimal lubrication and reduce friction. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings and bushings, Wear plates and guides, Low-friction sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||