This premium brass stock sheet offers exceptional formability and corrosion resistance. Precisely manufactured to 0.049" thickness, 45" length, and 46" width, it serves as a versatile raw material for demanding industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.049" |
| Length | 45" |
| Width | 46" |
A high-performance industrial component, this brass stock sheet is engineered with a nominal thickness of 0.049 inches, a length of 45 inches, and a width of 46 inches. Composed primarily of copper and zinc, its alloy composition provides excellent machinability, solderability, and a desirable aesthetic. The material exhibits good thermal and electrical conductivity, making it suitable for applications requiring these properties. Its inherent corrosion resistance ensures longevity in various environmental conditions, from moderate atmospheric exposure to aqueous solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or forming equipment is properly calibrated. 2. Carefully align the brass stock sheet for precise cuts or bends. 3. Secure the material to prevent slippage during fabrication processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect tooling for cutting or bending brass. | Employ sharp, dedicated tooling designed for brass to prevent material deformation and ensure clean edges. |
| Inadequate surface preparation before soldering or welding. | Thoroughly clean the brass surface with an appropriate solvent and abrasive to remove any oxides or contaminants for optimal joint strength. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Plumbing fixtures and fittings, Decorative metalwork and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||