This high-quality brass stock sheet, engineered for lubricating applications, offers superior performance in friction-sensitive environments. Its precise dimensions and material composition ensure reliability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.073" |
| Length | 47" |
| Width | 42" |
A proven choice for industrial professionals, this brass stock sheet boasts a thickness of 0.073 inches, a substantial length of 47 inches, and a width of 42 inches. Formulated with specific alloying elements for enhanced self-lubricating properties, this material exhibits excellent wear resistance and a low coefficient of friction, making it ideal for components in machinery that require continuous motion without excessive lubrication. Its non-sparking nature further expands its utility in hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fastening methods as dictated by the application's load and vibration requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys in high-friction applications. | Always specify a brass alloy explicitly designated for lubricating or bearing applications to ensure adequate wear resistance and low friction. |
| Improper surface preparation before installation. | Thoroughly clean and degrease both the brass sheet and the mounting surface to prevent premature wear or adhesion issues. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeves, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||