This high-quality brass stock sheet is engineered for lubricating applications. Its specific alloy composition and precise dimensions ensure optimal performance and wear resistance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.928" |
| Length | 44" |
| Width | 18" |
A proven choice for industrial professionals, this brass stock sheet boasts a thickness of 0.928 inches, a substantial length of 44 inches, and a width of 18 inches. Formulated for superior lubricity, its inherent properties minimize friction and reduce wear in dynamic mechanical systems. This material is ideal for fabricating components such as bushings, bearings, and sliding surfaces where consistent, low-friction operation is paramount. The brass alloy offers excellent corrosion resistance and machinability, ensuring ease of fabrication and long service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Precisely cut the brass sheet to the required dimensions for the component. 3. Securely fasten the fabricated component according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause material deformation. | Employ sharp, high-quality cutting tools specifically designed for working with brass to ensure clean cuts and prevent burrs. |
| Insufficient lubrication in the application, negating the material's benefits. | Always maintain adequate lubrication levels in systems utilizing this brass stock sheet to maximize its wear-reducing capabilities. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bushings, Wear plates, Self-lubricating bearings, Guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||