This premium brass stock sheet is specifically engineered for critical lubricating functions. Its dense microstructure and inherent self-lubricating properties ensure smooth operation and extended component life in high-wear environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.374" |
| Length | 34" |
| Width | 34" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional performance due to its inherent lubricity and excellent wear resistance. With a precise thickness of 0.374 inches, and dimensions of 34 inches by 34 inches, it is ideal for fabricating custom bearings, bushings, wear plates, and sliding components. The material's machinability allows for intricate designs, while its composition minimizes friction and heat buildup in demanding operational cycles. This grade is selected for its ability to withstand significant loads and repeated contact without premature failure, ensuring reliability in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Precisely machine the brass stock to the required dimensions and tolerances. 3. Install the fabricated component, ensuring proper fit and lubrication if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient lubrication in initial startup. | Apply a light coat of appropriate lubricant to mating surfaces before initial operation to prevent dry start-up wear. |
| Over-machining, leading to excessive material removal and weakened components. | Adhere strictly to design tolerances and avoid removing more material than specified during the machining process. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Bearings and Bushings, Wear Plates for Sliding Mechanisms, Self-Lubricating Components in Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||