This premium brass stock sheet, specifically engineered for lubricating applications, offers exceptional wear resistance and low friction. Its robust dimensions ensure suitability for a wide range of demanding industrial uses.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 19" |
| Width | 43" |
Engineered for reliability and performance, this brass stock sheet (0.639" thickness, 19" length, 43" width) is manufactured from a high-grade brass alloy renowned for its inherent self-lubricating properties and excellent machinability. The material's low coefficient of friction minimizes wear and heat generation in dynamic applications. Its substantial thickness provides structural integrity for heavy-duty components, making it ideal for bushings, bearings, and sliding mechanisms in industrial machinery. The alloy composition ensures good corrosion resistance, further extending its service life in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by ensuring it is clean, dry, and free from contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the intended component using recommended industrial adhesives or mechanical fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a designated lubricating grade. | Always select brass specifically formulated for lubricating applications to ensure the desired low-friction performance. |
| Inadequate surface preparation before installation. | Thoroughly clean and degrease both the brass sheet and the mating surface to ensure optimal adhesion and prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings and bearings, Wear strips and guides in automated machinery, Components requiring low friction and high wear resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||