This premium brass stock sheet is engineered for superior performance in pneumatic systems. Its robust construction and precise dimensions ensure reliable component fabrication and long-term operational integrity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.193" |
| Length | 18" |
| Width | 19" |
Precision-manufactured to tight tolerances, this brass stock sheet offers excellent machinability and formability, crucial for intricate pneumatic component manufacturing. The 0.193" thickness provides structural integrity for housings, fittings, and valve bodies, while the 18" x 19" dimensions allow for efficient material utilization. Brass's inherent corrosion resistance makes it ideal for environments where moisture or specific fluids are present, preventing degradation and ensuring consistent pneumatic system performance. Its good electrical conductivity is also a consideration for certain sensor integration within pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and flat cutting surface. 2. Carefully measure and mark desired dimensions using a scribe or marking tool. 3. Utilize appropriate cutting tools (e.g., shear, saw) for brass, ensuring safety precautions are followed. 4. Deburr all cut edges to remove sharp protrusions and prevent debris accumulation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor cut quality and tool damage. | Employ cutting tools specifically recommended for brass, such as fine-tooth saws or shears, to achieve clean, precise cuts. |
| Failure to deburr edges, which can create safety hazards and introduce particulate matter into pneumatic systems. | Always meticulously deburr all cut edges using a deburring tool or file to create smooth, safe surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Valve Bodies, Hydraulic Fittings, Pressure Regulator Components, Manifold Blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||