This brass stock sheet is engineered for superior lubricating performance in demanding environments. Its specific alloy composition and precise dimensions ensure optimal friction reduction and wear resistance for critical industrial components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.321" |
| Length | 41" |
| Width | 44" |
Purpose-built for heavy-duty applications, this brass stock sheet exhibits excellent self-lubricating properties due to its inherent material composition, minimizing friction and wear in sliding contact. With a substantial thickness of 0.321 inches, a generous length of 41 inches, and a width of 44 inches, it provides ample material for fabrication of robust wear plates, bushings, and other critical components. The alloy's machinability allows for intricate shaping and precise fitting, ensuring seamless integration into machinery where sustained low friction and high load-bearing capacity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mating surface, ensuring it is clean, smooth, and free of debris. 2. Carefully cut the brass stock sheet to the required dimensions for the specific application. 3. Securely fasten the fabricated brass component to the mating surface using appropriate fasteners or bonding agents, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installation. |
| Using incorrect fasteners that can damage the brass. | Employ fasteners made of compatible materials (e.g., stainless steel) and torque them to specification. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates for heavy machinery, Self-lubricating bushings, Guide rails and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||