This premium brass stock sheet is engineered for exceptional performance in lubricating applications. Its precise dimensions and inherent material properties ensure reliable, low-friction operation under demanding industrial conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.964" |
| Length | 35" |
| Width | 35" |
Purpose-built for heavy-duty applications, this brass stock sheet is manufactured to exacting standards for optimal performance in lubricating systems. With a substantial thickness of 0.964 inches and generous dimensions of 35 inches by 35 inches, it provides robust material for critical components. The inherent self-lubricating properties of brass, coupled with its excellent wear resistance and corrosion mitigation, make it an ideal choice for bearings, bushings, and sliding surfaces in machinery subjected to high loads and continuous operation. This material minimizes friction, extends component lifespan, and reduces maintenance requirements in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean all mating surfaces to remove any debris, grease, or old lubricant before installation. |
| Over-tightening fasteners, causing stress or deformation. | Use calibrated torque wrenches to tighten fasteners to the manufacturer's recommended specifications, ensuring uniform pressure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty industrial bearings, Self-lubricating bushings, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||