This robust brass stock sheet is specifically engineered for critical lubricating applications. Its substantial thickness and superior brass composition ensure excellent wear resistance and low friction properties for demanding operational environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.960" |
| Length | 37" |
| Width | 33" |
Engineered for reliability and performance, this 0.960" thick brass stock sheet offers exceptional lubricity, ideal for bearing surfaces, bushings, and sliding components. Manufactured from high-grade brass, it exhibits excellent machinability, corrosion resistance, and thermal conductivity. The material's inherent self-lubricating properties reduce wear and extend the service life of mating parts, making it suitable for high-load, low-speed applications in industrial machinery, automotive components, and marine equipment where consistent lubrication is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of debris. 2. Carefully position the brass stock sheet to the desired location. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean and de-grease mating surfaces before installation. |
| Over-tightening fasteners, causing deformation of the sheet. | Use specified torque values for fasteners and distribute them evenly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Self-lubricating bushings, Wear strips and guide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||