This high-density brass stock sheet offers exceptional durability and corrosion resistance. Its non-sparking properties make it a crucial component for safety-critical applications in hazardous environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.947" |
| Length | 24" |
| Width | 18" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.947 inches, a length of 24 inches, and a width of 18 inches. Composed of a specific brass alloy (e.g., UNS C26000 Cartridge Brass, known for its excellent machinability and corrosion resistance), it exhibits a typical tensile strength range of 450-550 MPa. Its inherent non-sparking nature and resistance to chemical degradation make it suitable for use in environments where flammable materials are present, preventing ignition risks. The material's density ensures robust structural integrity for demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately measure and mark the required cut-out or placement location. 3. Secure the brass sheet using appropriate fasteners or welding techniques, ensuring proper grounding if electrical conductivity is a concern.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can corrode and compromise the brass's integrity. | Utilize stainless steel or brass fasteners to maintain material compatibility and prevent galvanic corrosion. |
| Improper cutting techniques leading to burrs or uneven edges, which can create safety hazards. | Employ a high-quality cutting tool (e.g., abrasive cutoff wheel or band saw with a fine-tooth blade) and deburr edges thoroughly after cutting. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tool components, Explosion-proof enclosures, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||