This robust brass stock sheet, engineered for pneumatic systems, offers exceptional durability and corrosion resistance. Its precise dimensions ensure seamless integration and reliable performance in critical industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.935" |
| Length | 43" |
| Width | 15" |
Trusted by engineers across multiple sectors, this brass stock sheet (0.935" thickness, 43" length, 15" width) is meticulously manufactured from high-grade brass, renowned for its excellent machinability, inherent corrosion resistance, and good conductivity. The material's strength and malleability make it ideal for fabricating custom pneumatic components such as manifold blocks, valve bodies, and intricate fittings where precision and longevity are paramount. Its specific alloy composition ensures compatibility with a wide range of pneumatic fluids and operating pressures, providing a dependable foundation for pneumatic system design and manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Safely cut or machine the brass stock to the required component geometry using appropriate tools and safety precautions. 3. Deburr all edges thoroughly to prevent material fatigue and ensure clean assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect sheet thickness for the intended application's pressure requirements. | Always consult pneumatic system pressure ratings and select brass stock sheet thickness that provides adequate safety margins and structural integrity. |
| Inadequate edge preparation after cutting, leading to stress risers and potential component failure. | Thoroughly deburr all cut edges using a deburring tool or fine-grit abrasive to eliminate sharp corners and smooth the material surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Blocks, Custom Valve Bodies, High-Pressure Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||