This premium lubricating brass stock sheet offers exceptional self-lubricating properties and superior wear resistance. Precisely manufactured for demanding industrial applications requiring low friction and extended component life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.931" |
| Length | 24" |
| Width | 23" |
Built to exacting engineering tolerances, this brass stock sheet boasts a precise thickness of 0.931 inches, a length of 24 inches, and a width of 23 inches. Engineered with specific alloy compositions optimized for inherent lubricity, it significantly reduces friction and wear in dynamic systems. Its excellent machinability allows for intricate part creation while maintaining its self-lubricating characteristics, making it ideal for bearings, bushings, and sliding components where traditional lubrication is impractical or undesirable. The material exhibits good corrosion resistance, ensuring longevity in diverse operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any contaminants. 2. Precisely cut or machine the brass stock sheet to the required component dimensions. 3. Install the fabricated component ensuring proper fit and alignment within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy for lubricating applications. | Select a specifically formulated lubricating brass stock sheet to ensure inherent self-lubricating properties. |
| Inadequate surface preparation of mating components. | Ensure both the brass component and its mating surface are meticulously cleaned before assembly to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings in low-friction assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||