This premium brass stock sheet, precisely engineered to 0.929" thickness, 30" length, and 14" width, is optimized for demanding lubricating applications. Its inherent properties ensure superior performance and longevity in critical industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.929" |
| Length | 30" |
| Width | 14" |
Built to exacting engineering tolerances, this lubricating grade brass stock sheet features a nominal thickness of 0.929 inches, a length of 30 inches, and a width of 14 inches. Composed of a specific brass alloy optimized for low friction and wear resistance, it exhibits excellent machinability and self-lubricating properties essential for sliding components, bearings, and wear plates. Its thermal conductivity facilitates efficient heat dissipation in high-friction scenarios. The material's inherent corrosion resistance ensures reliability in various operational conditions. This sheet is suitable for custom fabrication of precision parts subjected to continuous movement and load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately measure and mark the required dimensions on the brass stock sheet using appropriate marking tools. 3. Carefully cut the brass sheet to the marked dimensions using a suitable cutting tool (e.g., abrasive saw, laser cutter). 4. Smooth all cut edges to remove burrs and sharp points using files or grinding equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy not specified for lubricating applications. | Always specify and procure brass stock sheet designated for lubricating or bearing applications to ensure optimal performance and reduced wear. |
| Failing to deburr edges after cutting, leading to potential damage to mating components or personnel injury. | Thoroughly deburr all cut edges after fabrication to ensure smooth operation and safety. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||