This high-performance brass stock sheet is engineered for demanding lubricating applications. Its exceptional tribological properties ensure reduced friction and wear, extending the operational life of critical components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.915" |
| Length | 13" |
| Width | 42" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.915 inches, a length of 13 inches, and a width of 42 inches. Composed of a specialized brass alloy, it exhibits excellent inherent lubricity and resistance to galling, making it ideal for sliding surfaces, bearings, and bushings where controlled friction is paramount. The material's machinability allows for precise component fabrication, meeting stringent industrial tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully machine the brass stock sheet to the required component dimensions. 3. Install the fabricated component, ensuring proper alignment and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installation. |
| Over-tightening fasteners, causing deformation and increased friction. | Adhere to specified torque values during assembly to prevent component distortion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Sliding Wear Plates, Gears and Sprockets in low-speed, high-load environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||