This robust brass stock sheet is engineered for demanding pneumatic systems. Its superior material properties ensure excellent durability and corrosion resistance, making it ideal for critical components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.882" |
| Length | 16" |
| Width | 25" |
A proven choice for industrial professionals, this brass stock sheet offers exceptional performance in pneumatic environments. With precise dimensions of 0.882 inches thickness, 16 inches length, and 25 inches width, it provides the structural integrity required for manifold blocks, valve components, and custom fittings. Brass's inherent corrosion resistance and machinability allow for intricate designs and long service life, ensuring optimal fluid control and system reliability under varying pressures and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of debris. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools. 3. Machine or fabricate the sheet into the desired pneumatic component, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, high-quality cutting tools specifically designed for brass to achieve clean cuts and precise edges. |
| Insufficient material thickness for the intended application's pressure rating. | Verify that the 0.882" thickness meets or exceeds the minimum thickness requirement for the pneumatic system's operational pressure and stress loads. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Blocks, Custom Pneumatic Valve Components, Pneumatic Fittings and Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||